18 galvanised beams cut, shot blasted and galvanised in 48 hours for a Brentwood customer

A customer let down by their previous supplier needed 18 beams cut, shot blasted and galvanised within 48 hours to keep their project on time. The steel was in stock, and we turned it round.

Published 14 April 2023

Questions about this project?Speak to the MAH Steel team about 18 galvanised beams cut, shot blasted and galvanised in 48 hours for a Brentwood customer.

Contact MAH Steel

Project overview

A residential project in Brentwood needed fabricated steel at speed. Having been let down by a previous supplier, the customer turned to us because they had to have what they needed. The steel was in stock, so the order was processed and sent to the workshop straight away.

How we did it

Cutting and preparation

Once the steel was offloaded, our cutting and saw operators checked the cutting list and cut the steel to the required measurements. Our workshop manager issued job tickets and Tekla drawings, and the ends were cleaned up and squared off to give the correct cut lengths. The beams were then shot blasted.

Galvanising and delivery

After manufacture, the steel was sent to the galvanisers on an express turnaround to keep to the client programme. When it came back it was checked again and against the delivery note, loaded onto one of our Hiab lorries and delivered to site.